REGULATORY TESTING FROM START TO CERTIFICATE

ISED New Radio Standard Specification for the 650-770MHz bands

Canada
May 14, 2019

 

Science and Economic Development Canada’s (ISED) has published Radio Standards Specification 130, issue 2, Equipment Operating in the Frequency Bands 617-652 MHz, 663-698 MHz, 698-756 MHz and 777-787 MHz. The document was posted in February 2019 and replaced RSS-130, issue 1.

The equipment covered by this Standard is classified as Category I equipment and needs to be certified by ISED’s Certification and Engineering Bureau or by a recognized certification body.

This standard is valid now. However, the government provides a six-month transition period that starts from the date of publication of the standard. During this transition period, both RSS-130 issue 1 or issue 2 are acceptable for the certification purposes. After this period, only certificates following the requirements of RSS-130 issue 2 will be accepted in Canada.

Here are the main changes implemented in Radio Standards Specification 130

1. The frequency bands 617-652 MHz and 663-698 MHz and the related requirements were added to the Standard

2. Provision for a transition period was added

3. “Equivalent isotopic ally radiated power” (e.i.r.p.) characteristic of equipment was changed to “effective radiated power” (e.r.p.)

4. Сlarification of the equipment’s unwanted emission limit was made

5. It was clarified that equipment’s measurement shall be performed only with the carrier frequency set at the lowest frequency and the highest frequency in each frequency band

6. Guidance’s on determining the occupied bandwidth when measuring frequency stability limits for equipment able to transmit numerous channels simultaneously was added

7. Measurement section on multiple antennas was removed as the measurement method is defined in ANSI C63.26, American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Service (referenced in RSS-Gen, General Requirements for Compliance of Radio Apparatus).

 

360Compliance provides Testing & Certification for type approval services and global market access in 195 countries. With proven expertise in worldwide regulations, 360Compliance can help your company shorten time to any market, minimize risks and manage the regulatory process from A-Z.

Contact us at contact@360compliance.co

Share this:

Recent Posts:

MALAYSIA had announce on the New Class Assignment

Asia & Pacific
June 15, 2019

  Malaysia had announce on the New Class Assignment. There are few changes for this Class Assignment compare to Class Assignment No 3 – 2015. Major changes for this Class assignment will be 1. Additional Inductive application Devices into the schedule 2. C...

Read More >>

S. KOREA – MSIT released Notice offering revisions in the 917 to 923.5 MHz band

Asia & Pacific
June 15, 2019

  The Ministry of Science and ICT (MSIT) of Korea released Notice 2018-88 offering some revisions of technical standards of radio equipment for radio stations that can be opened without notification. The changes include establishment of the radio equipment tech...

Read More >>

Contact Us

Welcome to 360 Compliance
Send